Your browser is out of date!

Update your browser to view this website correctly.

Update browser
Be sure to visit us at Booth W4943 at NPE2024 - See you there
Polifil® C
Polifil® RMC
Polifil® T
Polifil® RMT
Polifil® GFPP
Polifil® GFPPCC
Polifil® GFPPCC-WS
Polifil® GFRMPPCC
Polifil® BS
Polifil® RC
Polifil® GFABS
Polifil® GFPC
Polifil® GFN/MRN 6
Polifil® GFN/MRN 6/6
Polifil® Nylon 6
Polifil® Nylon 6/6
Polifil® RP-ABS
Polifil® RP-HDPE
Polifil® RP-HIPS
Polifil® RP-LDPE
Polifil® RP-PP
Polifil® TPO-60D12
Polifil® TPO-60D12UV
Polifil® TPOT-2024UV

Polifil® TPOT-2024UV

Talc Reinforced Thermoplastic Polyolefin with UV Stabilization

Polifil® TPO-2024UV is a UV stabilized injection molding grade of compounded TPO utilizing metallocine catalyst technology. This product is intended for applications requiring outstanding impact properties at both ambient and low temperatures needing UV stabilization. The talc filler provides controlled shrinkage and reduced part warpage. Typical...

Learn more
See Data Sheet
Downloads
PhysicalASTM/
Method		Polifil®
TPOT-2024UV
Specific gravityD 7921.04
Melt flow 230/2.16 (g/10 min)D 1238Nominal 24
Water absorption, 24 hours (%)D 570nil
Mold shrinkage, 2.5mm wall (%)TPG0.9
Mechanical @ 73°FASTM/
Method		Polifil®
TPOT-2024UV
Tensile strength @ yield (MPa)D 63826
Tensile elongation @ yield (%)D 6386
Tensile elongation @ break (%)D 638100
Flexural modulus, tangent* (MPa)D 7902300
Flexural strength, max load* (MPa)D 79033.6
Izod impact, notched, 23°C (kJ/m²)D 256>22 partial break
Izod impact, notched, -30°C (kJ/m²)D 2565.0
Gardner impact, 1/2″ tup, 23°C (J)D 5420>35 ductile
Gardner impact, 1/2″ tup, -20°C (J)D 5420>15 ductile
Hardness, shore (D-scale)D 95567
* denotes non-standard crosshead speed of 2mm/min
ThermalASTM/
Method		Polifil®
TPOT-2024UV
Deflection temperature, 1820 kPa (°C)D 64862

Downloads

Polifil® TPOT-2024UV Data Sheet
SDS-Polifil® TPOT-2024UV Natural
SDS-Polifil® TPOT-2024UV Black
Processing Guide
Troubleshooting Guide

The property values listed in the PDF document(s) have been obtained using laboratory controlled test methods. They are offered without guarantee since conditions under which the product is used are beyond our control. Mold shrinkage is intended as a guide only, as specific shrinkage is affected by part design, mold design and molding conditions. Therefore, The Plastics Group disclaims any liability for loss or damage incurred in connection with the use of this product.

Thank you for contacting TPG.
One of our staff members will be back in touch with you ASAP with a response to your inquiry. Thanks again for your interest.
Thank you for contacting TPG.
One of our staff members will be back in touch with you ASAP with a response to your inquiry. Thanks again for your interest.