Your browser is out of date!

Update your browser to view this website correctly.

Update browser
Be sure to visit us at Booth W4943 at NPE2024 - See you there
Polifil® C
Polifil® RMC
Polifil® T
Polifil® RMT
Polifil® GFPP
Polifil® GFPPCC
Polifil® GFPPCC-WS
Polifil® GFRMPPCC
Polifil® BS
Polifil® RC
Polifil® GFABS
Polifil® GFPC
Polifil® GFN/MRN 6
Polifil® GFN/MRN 6/6
Polifil® Nylon 6
Polifil® Nylon 6/6
Polifil® RP-ABS
Polifil® RP-HDPE
Polifil® RP-HIPS
Polifil® RP-LDPE
Polifil® RP-PP
Polifil® TPO-60D12
Polifil® TPO-60D12UV
Polifil® TPOT-2024UV

Polifil® RP-LDPE

Reprocessed Low Density Polyethylene

Polifil® RP-Low Density Polyethylene is a soft, tough material with good clarity and high chemical resistance. LDPE remains flexible and retains impact strength at very low temperatures. High melt flow (low viscosity) grades are injection molded into products such as containers and lids. Low melt flow (high viscosity) grades are used in blown...

Learn more
See Data Sheet
Downloads
PhysicalASTM/
Method		Polifil®
RP-LDPE
Reinforcement content (%)TPG WI–
Specific gravityD 7920.92
Melt flow 230/2.16 (g/10 min)D 12381.0*
Water absorption, 24 hours (%)D 570nil
Mold shrinkage – 1/8″ specimen (in/in)D 9550.030
* melt flow may be specified
Mechanical @ 73°FASTM/
Method		Polifil®
RP-LDPE
Tensile strength (psi)D 6381,700
Elongation @ yield (%)D 63815
Elongation @ break (%)D 638>300
Tensile modulus (kpsi)D 63824
Flexural modulus, tangent (kpsi)D 79030
Flexural strength (psi)D 7901,400
Izod impact, notched (ft-lbs/in)D 256no break
Gardner impact, 1/2″ tup (in-lbs)D 5420>200
Hardness, shore (D-scale)D 141552
ThermalASTM/
Method		Polifil®
RP-LDPE
Deflection temperature, 66psi (°F)D 648160
Deflection temperature, 264psi (°F)D 648–

Downloads

Polifil® RP-LDPE Data Sheet
SDS-Polifil® RP-LDPE
SDS-Polifil® RP-LDPE Mixed Color
Troubleshooting Guide

The property values listed in the PDF document(s) have been obtained using laboratory controlled test methods. They are offered without guarantee since conditions under which the product is used are beyond our control. Mold shrinkage is intended as a guide only, as specific shrinkage is affected by part design, mold design and molding conditions. Therefore, The Plastics Group disclaims any liability for loss or damage incurred in connection with the use of this product.

Thank you for contacting TPG.
One of our staff members will be back in touch with you ASAP with a response to your inquiry. Thanks again for your interest.
Thank you for contacting TPG.
One of our staff members will be back in touch with you ASAP with a response to your inquiry. Thanks again for your interest.