Your browser is out of date!

Update your browser to view this website correctly.

Update browser
Be sure to visit us at Booth W4943 at NPE2024 - See you there
Polifil® C
Polifil® RMC
Polifil® T
Polifil® RMT
Polifil® GFPP
Polifil® GFPPCC
Polifil® GFPPCC-WS
Polifil® GFRMPPCC
Polifil® BS
Polifil® RC
Polifil® GFABS
Polifil® GFPC
Polifil® GFN/MRN 6
Polifil® GFN/MRN 6/6
Polifil® Nylon 6
Polifil® Nylon 6/6
Polifil® RP-ABS
Polifil® RP-HDPE
Polifil® RP-HIPS
Polifil® RP-LDPE
Polifil® RP-PP
Polifil® TPO-60D12
Polifil® TPO-60D12UV
Polifil® TPOT-2024UV

Polifil® RP-ABS

Reprocessed Acrylonitrile-Butadiene Styrene

Polifil® RP- Acrylonitrile-Butadiene Styrene is a styrenic resin with improved toughness and heat resistance versus HIPS grades. ABS exhibits high gloss, low shrinkage, and good dimensional stability. ABS is widely used in injection molding of appliances, furniture, and automotive parts. ABS also has high melt strength suitable for the production...

Learn more
See Data Sheet
Downloads
PhysicalASTM/
Method		Polifil®
RP-ABS
Reinforcement content (%)TPG WI–
Specific gravityD 7921.05
Melt flow 230/2.16 (g/10 min)D 12382-10*
Water absorption, 24 hours (%)D 570.02
Mold shrinkage – 1/8″ specimen (in/in)D 9550.005
* melt flow may be specified
Mechanical @ 73°FASTM/
Method		Polifil®
RP-ABS
Tensile strength (psi)D 6386,400
Elongation @ yield (%)D 6384
Elongation @ break (%)D 63820
Tensile modulus (kpsi)D 638290
Flexural modulus, tangent (kpsi)D 790360
Flexural strength (psi)D 7909,500
Izod impact, notched (ft-lbs/in)D 2563.5
Gardner impact, 1/2″ tup (in-lbs)D 5420100
Rockwell hardness (R-scale)D 78598
ThermalASTM/
Method		Polifil®
RP-ABS
Deflection temperature, 66psi (°F)D 648205
Deflection temperature, 264psi (°F)D 648195

Downloads

Polifil® RP-ABS Data Sheet
SDS-Polifil® RP-ABS
Troubleshooting Guide

The property values listed in the PDF document(s) have been obtained using laboratory controlled test methods. They are offered without guarantee since conditions under which the product is used are beyond our control. Mold shrinkage is intended as a guide only, as specific shrinkage is affected by part design, mold design and molding conditions. Therefore, The Plastics Group disclaims any liability for loss or damage incurred in connection with the use of this product.

Thank you for contacting TPG.
One of our staff members will be back in touch with you ASAP with a response to your inquiry. Thanks again for your interest.
Thank you for contacting TPG.
One of our staff members will be back in touch with you ASAP with a response to your inquiry. Thanks again for your interest.